Do you Need Mild Steel ?
Mild steel, also called low carbon steel, is one of the most commonly used steels. It is used in the construction and automotive industries as well as for fences, signs and countless other applications. It is valued for its weldability, workability and plasticity. Structural steel is characterized primarily by a carbon content of less than 0.2% by weight.The American Iron and Steel Institute (AISI) four-digit mild steel classification codes begin with “10” and end with two digits less than 20, indicating the steel’s approximate carbon content in cents.
This steel is an iron alloy whose main alloying element is carbon. It is one of the most commonly used forms of steel and can be used for a variety of general applications. Steel owes its popularity to its sufficient strength at low cost as well as its excellent machinability and weldability. Different grades of Steel have different carbon contents, with higher carbon content resulting in greater strength at the expense of ductility. In some cases, additional alloy elements are added to improve properties such as tensile strength, corrosion resistance and wear resistance.
Let Us Help !
Mild steel is made up of an iron (Fe) base with the addition of small amounts of carbon. Low-carbon steel is typically defined as having less than 0.2 % carbon by ASM International. Different grades of mild steel are defined by their differing levels of carbon. Another common alloying element is manganese (Mn). There are many different grades of Steel. Mild steels classified according to the AISI (American Iron and Steel Institute) numbering system will all begin with “10” as their first two digits signifying their low carbon content. Low-carbon steel, and by extension mild steel, will have the final 2 digits of the designation as any number less than 20 (approximate carbon content multiplied by 100). Most mild steel has low (<1%) quantities of phosphorus and sulfur and these elements are actively limited as they are considered impurities.
We know MILD STEEL !
Mild steel is a general-purpose material that can be found in most industries. Some typical applications include: car bodies, furniture, wire, rebar, and fasteners. Higher strength mild steel is used for structures and storage tank plating. This steel is ductile and strong, making it a very durable material. The strength of mild steel varies depending on its type and classification. Strength is the amount of energy that can be absorbed without breaking. It is calculated as the area under the material’s stress-strain curve defined up to the failure point. The mechanical property commonly used to determine the strength of a material is Charpy impact strength. For example, the Charpy impact strength for 1020 is 24 J at 10°C.
Here at Laser.us we hold Quality to a high mark, so we ensure our materials are of the best quality for your Labeling for Data Centers & IT Equipment. In a technologically demanding world, the data center is the most crucial component to insure “the lights stay on”. If you require Mild Steel – You came to the right place. Simply fill out the RFQ form below and one of our team-members will reach out as soon as possible. We don’t ask for much information, just the basics to get started on sending you an estimate. We understand how valuable your time is and we have stream-lined the process of design, manufacturing and fulfillment. Let us help you build your data center.
Why Lasers are the Future ?
Unlike traditional hand techniques, the intricacy, speed, and cost-effective nature of laser engraving has made it a popular method for businesses needing to personalize large volumes of Labels and Plates for Data Centers & IT Equipment with a consistent result over-all. Laser engraving labels requires careful consideration of the materials properties and refine the laser to the strict parameters to achieve the desired results. Luckily over the years we have perfected our engraving techniques across various material types and popular brands!
Got a Project?
-CONTACT-
(800) 482-1553
Talk to a REAL PERSON:
Monday – Friday – 9:00 am – 5:00 pm
– OR –
Email Us Here!
Check out our sister Sites:
Metaltagmaker.com
Lasercuttingpros.net
Engravedswitchplatesnow.com
Laserengravingpros.com